2N Lift8, User Manual

Page: 350 / 377

2N TELEKOMUNIKACE a.s., www.2n.cz 350/377
List of Parameters
Click on the parameter to be modified. The dialogue window includes the Numeric
code, Name and Unit of the parameter. Click the question mark to know the parameter
function. The Value parameter defines the range of values, which can be modified. If
you use numeric or hourly values, you can use the system scroll bar to set the required
value. With wide-range values, however, we recommend you to click the value and
enter the new value via a keypad. The same applies to string (password) entering. Or,
you can use a combobox to modify parameters with pre-defined values.
Parameter Setting
There are three controls in the lower part of the dialogue window. Click Cancel to quit
editing and save the original setting. Click Default to set the default value and OK to
confirm the new setting. If you make a typing mistake (set a value beyond the limits or
exceed the character limit), you will be warned by the validator.