2N Lift8, User Manual

Page: 340 / 377

2N TELEKOMUNIKACE a.s., www.2n.cz 340/377
Press a button to send the particular DTMF character into the call. If the intercom
address is completed, the intercom location is displayed on the map below the
keypad. Use the slider in the left-hand upper corner to zoom in/out. If the lift cabin is
equipped with a camera, you can view the cabin image displayed below the map. Click
on this miniature to display the Camera window to view more image details and
evaluate the cabin situation more precisely. Click the Get new image button to load a
new, more recent image. A progress bar signals transmission and the image will get
displayed if transmitted successfully. Click the cross to quit the Camera window.
Tip
If the Camera window or image transmission is active, the call will not be
terminated automatically as the Duration parameter is ignored. It is
because high-resolution image transmissions take a rather long time and
the time limit might be too low in this case.
Incoming Calls
There are three tables to the right like in the Intercoms menu. Use the column filters
for search; refer to the call describing subsections. The Responsible technicians table
displays the technicians responsible for the intercom administration and helps quickly
select and send the appropriate technician. The Alarm calls table displays a list of
alarm calls from the given intercom including the call date/time (Timestamp), call-
processing Agent and Note added during the alarm call. The Checking calls table
shows all check calls from the given intercom since intercom addition to the database
Each record includes its date/time according to the server archives deletion setting.
and result.