2N Lift8, User Manual

Page: 112 / 377

2N TELEKOMUNIKACE a.s., www.2n.cz 112/377
Caution
The warranty does not cover any defects or failures of the product
arisen as a result of improper mounting in contradiction to these
instructions.
A wrong mounting procedure may lead to damage to the electronics
due to water infiltration. The circuits are constantly under voltage and
water leakage causes electrochemical reaction. No warranty can be
claimed for products damaged in this manner!
Common Mounting Principles
Tip
Choose flush mounting where possible to make your product more
elegant, vandal-resistant and safer.
You can buy the flush mounting kit in advance and commission a
specialised firm to install the device. Moreover, the flush mounting kit
helps you level the audio unit properly (with a maximum vertical position
deviation of 2°).
Caution
Check the diameter of the plug holes. If the holes are too large, the plugs
may come loose! Use a building glue for fixing if necessary.
Check the depth of the plug holes! The plug length is 50 mm, the screw
length is 90 mm.
Do not use lower-quality plugs to avoid their pulling out of the wall!
2N Lift8 Fireman
®
is assembled with stainless steel screws. Using
different, lower-quality screws may lead to screw and surface corrosion!
Make sure that no impurities get into the device (especially on the
sealing and microphone sound guides) after removing the front panel.