2N Lift8, User Manual

Page: 309 / 377

2N TELEKOMUNIKACE a.s., www.2n.cz 309/377
SMTP Server Settings
Address and Port are the first parameters of the menu. Set any SMTP server that
supports insecure connection on port 25 as the Email server is not intended for
encrypted SSL communication. Then complete the Security items – User name and
Password for authentication – as communicated to you by your network
administrator. Select the required functions in the Report activation section. Enable
periodic reports to make the server generate and send a report automatically at a
defined time on a selected day. Enable sending of prompt notifications to watch all
the intercoms and send error state information immediately regardless of the periodic
report interval. Email sending diagnostics helps you define a text and test email
recipient of your own to test the correct client setting for SMTP email sending.
Email Server – SMTP Server Settings Menu
Report Settings
Define the content of the email reports to be sent. Four types of notifications are pre-
defined here: checking, alarm and outgoing calls and prompt notifications. Set the
contents of the three report types as follows: Select the report recipient email address
or set groups on the provider's SMTP server for group/bulk sending. Then define the
email subject and text (body). You can use a string to be replaced with the current
intercom count or date. Refer to the list of supported strings below the report body.
At present, the following strings are supported: