2N Lift8, User Manual, Page: 156 / 377

2N TELEKOMUNIKACE a.s., www.2n.cz 156/377
Par.
No
Parameter name Range of values Default value Note Info
Set 2 –
confirmation
mode for
number 1–6
1 = with confirmation
DTMF (1),
2 = confirmation of
picking up (supported
only for GSM/UMTS
/VoIP),
3 = CPC Antenna,
4= CPC KONE,
5 = P100,
6 = autodetection DTMF
protocol (CPC Antenna
/P100),
7 = CPC Antenna 2N ext,
8 = CPC KONE 2N ext,
9 = P100 2N ext
2N ext is a protocol that
transmits the shaft
number and audio unit
position together with
the ID (to be displayed in
). 2N
®
Lift8
If there is no guarantee of
problem-free transfer of
DTMF, do not set 6 for
autodetection CPC
Antenna/P100, but
precisely specify the
protocol to be used (3 or
5).
071 Checking call
memory 1
up to 16
digits: 0–9
empty
Entering characters ,
and ' for a 1- p'
second pause while
programming is possible
via a PC (use the 2N
®
). Service Tool
072 Checking call
memory 2
up to 16
digits: 0–9
empty
073 up to 16 empty