2N Lift8, User Manual

Page: 159 / 377

2N TELEKOMUNIKACE a.s., www.2n.cz 159/377
Par.
No
Parameter name Range of values Default value Note Info
087 Insert specific
character in
fault reporting
memory
088 Count of
automatic
dialling cycles
for ERROR
0–9 3
181–
186
Confirmation
mode for
number 1–6
3–9 5 3 = CPC Antenna,
4= CPC KONE,
5 = P100,
6 = autodetection DTMF
protocol (CPC Antenna
/P100)
If there is no guarantee of
problem-free transfer of
DTMF, do not set 6 for
autodetection CPC
Antenna/P100, but
precisely specify the
protocol to be used (3 or
5).
501 Default output
state of IO
module 1
ABCD empty The value defines the
state of the I/O modules
after the system start:
A= output 1
B= output 2
C= output 3
D= output 4
0= output off
1= output on
From
version
1.6.0
502 Default output
state of IO
module 2
ABCD empty
503 Default output
state of IO
module 3
ABCD empty