25-Seven PDM Operator'S Manual Download Page 4

Page: 4 / 79

PDM Operator's Manual Version 2.4a • September 2019

PDM

VENTILATION WARNING

This equipment requires the free flow of air for adequate cooling. Do not block the

ventilation openings in the sides or rear of the unit. Failure to allow proper ventilation

could damage the unit or create a fire hazard. Do not place the units on a carpet, bedding, or

other materials that could interfere with any panel ventilation openings.

Trademarks and Licenses

Voltair and 25-Seven are trademarks of TLS Corp. Arbitron, Nielsen, Arbitron PPM, Portable

People Meter, PPM, Nielsen Audio and related trademark are the property of the Nielsen

Company. All other trademarks are the property of their respective holders.
All versions, claims of compatibility, trademarks, etc. of hardware and software products

not made by 25-Seven which are mentioned in this manual or accompanying material are

informational only. 25-Seven makes no endorsement of any particular product for any

purpose, nor claims any responsibility for operation or accuracy. We reserve the right to

make improvements or changes in the products described in this manual which may affect

the product specifications, or to revise the manual without notice.
This document and its content are copyrighted by 25-Seven and TLS Corporation and

may not be copied, reproduced, or distributed in any form without expressed written

permission.
Certain libraries are licensed to You under the terms of the GNU General Public License,

Version 2 (“GNU GPL”). Telos is not allowed to sub-license these libraries to You as You are

deemed to have Your own direct license from the original licensee. Telos does not modify

these libraries in any way. Telos hereby offers to You, upon Your request and for the actual

costs of materials and shipping, all source code and object code files for all such GNU

59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. Everyone is permitted to copy and

distribute verbatim copies of this license document, but changing it is not allowed.

Updates

Features and operations of Voltair are determined largely by software. 25-Seven Systems

strives to provide the most stable and feature-rich software available. We encourage you to

check for software updates from time to time by visiting our website or by contacting us

directly.

Feedback

We welcome feedback on any aspect of our products or this manual. In the past, many

good ideas from users have made their way into software revisions or new products. Please

Summary of Contents for PDM
















































































Search results

Summary of Contents for PDM

Reviews:

Related manuals for PDM

Brands by name

Popular brands

25-Seven PDM, Operator'S Manual

Search results

Summary of Contents for PDM

Reviews:

Related manuals for PDM

Brands by name

Popular brands