WAV Screen
Page 8 of 82
Copyright 1010music LLC 2020
Bitbox MK2 1.0.8 User Manual
Pads Screen
Keys Screen
Grid Screen
GENERAL WORKFLOW
The bitbox mk2 module allows you to record and
playback samples in creative ways. When working with
bitbox mk2, you create presets that store the selection of
samples and parameters that you want to use together.
You can create any number of presets,
limited only by the space available on your microSD card
(up to 256 GB cards). You can get even more space by
getting more microSD cards.
When creating a preset, you start by assigning a WAV file
or bank of flies to each pad. Once loaded, bitbox mk2
shows you a visual representation of your WAV files.
Here you can set the Pad mode and adjust start, length,
and loop points. You can also cut the samples into slices
that can be triggered independently. Touch screen pinch
and stretch gestures allow you to zoom into the display of
the wave file to get more precise control when you need
it, and also allow you to zoom out to see the whole
picture.
You then use the parameter screen to adjust playback
settings for the pad, and configure modulation sources
for some parameters, such as pitch and filter. Here you
can apply an envelope, change between gate, toggle and
trigger mode, control looping, and configure MIDI options.
You can also record a new wav file or a bank of wav files
into a pad if you want to create your own sounds.
Once you have some pads set up, you can trigger them
on the pads screen, play notes with them on the Keys or
Grid screen, or use an external MIDI or CV controller to
trigger them.
Pad Parameters Screen
