Note:
► If you continue to add WAV files to your preset after you pack it, the preset will
still point to these WAV files in their source folders. Pack the preset again to copy
these files over.
► If the
Pack
option is disabled, then the preset is fully packed already.
Note:
► You cannot undo deleting a preset.
To Pack a Preset:
After you spend time carefully creating a preset, you don’t want to worry about it getting
broken if you make changes to that WAV file or re-organize your sample library. You
may also want to gather up all of the files used in a preset so you can move it to another
microSD card or archive it on your computer. The Pack feature was created to address
these needs.
1.
Load the preset you want to pack.
2.
Push HOME until you see the Menu screen,
then touch Presets to display the Preset
Management screen.
3.
Touch File, then Pack. Bitbox mk2 will copy all
of the WAV files used by this preset into the
preset’s folder. Any multi-sample banks will be
copied with their folder. The preset.xml file will
be updated to point to these copies of the WAV
files and will be saved.
To Delete a Preset:
When you delete a preset, you remove the preset from the list of presets on the Preset
Management Screen, and you delete the corresponding folder and XML file from the
microSD card. All files in the preset folder, including new recordings, will be deleted. To
delete a preset:
1.
Press the HOME button repeatedly until you see the Menu screen, then touch
Presets to display the Preset Management screen.
2.
Use the control knobs to scroll through the list of presets.
3.
Touch File to display the Preset File Menu.
4.
Touch Delete to delete the highlighted preset. Touch OK on the confirmation
prompt to continue with Delete, or touch anywhere else to cancel.
Preset File Menu
Page 59 of 82
Copyright 1010music LLC 2020
Bitbox MK2 1.0.8 User Manual
