1010music Bitbox mk2 1.0.8 User Manual Download Page 39 | Manualshive

Page: 39 / 82

background image

Copyright 1010music LLC 2020

Page 39 of 82

Bitbox MK2 1.0.8 User Manual

Record a New WAV File

Bitbox mk2 comes with hundreds of WAV files loaded on the microSD card. You can
also record new WAV files to create your own custom sound.

To Record a WAV File:
Start by plugging an audio signal source into the IN1 and IN2 jacks. These jacks form a
stereo pair.

1.

Push the Home button to display the Pads screen.

2.

Touch a pad in the grid to select it. With the
pad selected, press the INFO button. If the
pad is empty, bitbox mk2 will display the Load
and Record screen. If the pad is already
loaded, bitbox mk2 will display the Waveform
screen. If you are on the Waveform screen,
press the Pad Mode icon to the left of the WAV
file name at the top of the screen and then
touch New Rec. You will now see the Load and
Record screen.

Load and Record Screen

Just above the recording parameters, you will see a VU meter that shows the audio
input levels. Adjust the level of your incoming signal or adjust the gain parameter if
needed.

Configure your recording session by selecting values for the parameters in the table
below. Turn the top knob to select a parameter, then turn the bottom knob to select a
value for that parameter.

Parameter

Description

Range of Values

Rec Input

Sets whether you are recording from only
one input, the stereo input pair, or re-
sampling the audio currently being
generated by the module to OUT1 and
OUT2.

In 1/2, In 1, In 2, Resam

Gain

The VU meters represent the level of the
signal to be recorded. You can adjust the
gain to get the desired level and avoid
clipping.

-96.00 dB to +20.00 dB

Mon Output

Controls where the input signals received
through IN1 and IN2 are played out to
enable you to monitor the recording.

Out 1/2, Out 1, Out 2, FX1/2, FX1, FX2,

«
...
37
38
39
40
41
...
»

Summary of Contents for Bitbox mk2 1.0.8



















































































Reviews:

No comments

Related manuals for Bitbox mk2 1.0.8

DynaPak DP-2010RXN

Brand: YZ Systems Pages: 62

Brand: Facom Pages: 48

nanobox tangerine

Brand: 1010 Music Pages: 137

Brand: CLIMET INSTRUMENTS Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands