1010music Bitbox mk2 1.0.8 User Manual Download Page 16 | Manualshive

Page: 16 / 82

background image

Page

Parameter

Description

Rec

RecToPlay

If you have RecToPlay set to ON, bitbox mk2 will automatically start to play
the new sample when recording ends if the Length parameter was set to a
value other than Custom for recording.

RecConfig

When this is set to Global, changes made to recording settings on the Pad
Loading and Recording screen will apply to all empty pads. When this is set
to Per Pad, these changes only change the current pad and do not change
what is used for other empty pads. Use Per Pad when you want to set up a
Template preset with different recording configurations for each pad.

MIDI In

MIDI Pads

Specifies which MIDI channel is used to trigger pads. If a channel selected
here is also chosen as the MIDI IN channel for a pad, that pad will also play
notes in response to signals received on this MIDI channel. See the section
Use MIDI and CV with Bitbox mk2 below for more information.

When this parameter is set to Omni, pad hits and can be triggered by all
MIDI channels. However, any MIDI channel that is assigned as the MIDI In
for a pad or as the MIDI Keys parameter will be excluded from the list of
channels that will trigger pad hits when MIDI Pads is set to OMNI.

MIDI Program Change messages received on this channel will be
processed by bitbox mk2if the ProgChange parameter is set to ON.

ProgChange

When set to ON, bitbox mk2 will respond to MIDI program change
messages received on the MIDI Pads and MIDI Keys channels by opening
the Preset that maps to the specified program number. See the section Use
MIDI and CV with Bitbox mk2 below for more information. Program change
messages on other channels will be ignored.

Remember that bitbox mk2does not automatically save changes. This
means that when you change presets you will lose any unsaved changes.

MIDI Keys

Specifies which MIDI channel is used to play notes for the currently selected
pad. If a channel selected here is also chosen as the MIDI IN channel for a
pad, that pad will also play notes in response to signals received on this
MIDI channel. See the section Use MIDI and CV with Bitbox mk2 below for
more information.

When this parameter is set to Omni, notes will be triggered for the currently
selected pad by all MIDI channels. However, any MIDI channel that is
assigned as the MIDI In for a pad or as the MIDI Pads parameter will be
excluded from the list of channels that will trigger notes for the currently
selected pad.

MIDI Program Change messages received on this channel will be
processed by bitbox mk2if the ProgChange parameter is set to ON.

At the top of the Tools page, you can see two numbers. The left number (9GB in the
sample screenshots) is the space remaining on the microSD card. The other number
(1.0.8 in the sample screenshots) is the current firmware version number.

When you are done, press the HOME button to go back to the Pads screen.

Copyright 1010music LLC 2020

Page 16 of 82

Bitbox MK2 1.0.8 User Manual

«
...
14
15
16
17
18
...
»

Summary of Contents for Bitbox mk2 1.0.8



















































































Reviews:

No comments

Related manuals for Bitbox mk2 1.0.8

Brand: Caron Measurement & Controls Pages: 18

Brand: E-Mu Pages: 119

Brand: Tisch Environmental Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands