1010music Bitbox mk2 1.0.8 User Manual Download Page 54 | Manualshive

Page: 54 / 82

background image

Page 54 of 82

Copyright 1010music LLC 2020

Bitbox MK2 1.0.8 User Manual

APPLY EFFECTS

Bitbox mk2 has two effects that can be applied to as many pads as you want. You apply
an effect by selecting the send amount for the pad for each of the desired effects (Delay
and Reverb) and then configuring the parameters for each effect. All pads get the same
parameter values for each effect. The output of the effects, the wet stereo signal, is
routed to Outs 1 and 2. The pad output without the effects is routed to the the output
configured for each pad.

To Route a Pad to an Effect:

1.

Push the HOME button repeatedly until you
see the menu screen, and then touch FX to
display the FX screen.

2.

On the FX screen, touch the pad that you want
to use. Touching a pad does not trigger it on
this screen.

3.

Turn one of the left knobs to set the Delay send
amount for the pad. This is the amount of the
signal from this pad that you want to send to
the Delay for effects processing. You can also
use the touch screen to slide the level bar
graph for the effect. When a pad is sending
some of its signal to Delay, a blue triangle is
displayed in the top left corner of the pad. Turn
one of the right knobs to apply Reverb to the
pad and a blue triangle will appear in the top
right corner of the pad.

To Modify Effect Parameters:

1.

Push the HOME button repeatedly until you
see the menu screen, and then touch FX to
display the FX screen.

2.

Touch the FX1 or FX2 box on either side of the
screen to select it. The currently selected effect
is highlighted pink.

3.

Push the INFO button to display the effect
parameters screen for the selected effect.

4.

Turn the knobs to adjust the effect parameters.
You will hear the impact of the parameter
changes in real time. Here are the available
effect parameters:

FX Screen

Delay Effect Parameters

Screen

«
...
52
53
54
55
56
...
»

Summary of Contents for Bitbox mk2 1.0.8



















































































Reviews:

No comments

Related manuals for Bitbox mk2 1.0.8

Brand: Sibata Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands