manualshive.com logo in svg

1010music Bitbox mk2 1.0.8, User Manual

Get the most out of your 1010music Bitbox mk2 1.0.8 with our comprehensive User Manual. Download it for free from our website [website] and unlock the full potential of this powerful sampler and drum machine. This manual provides step-by-step instructions and useful tips to enhance your music production experience.

Share
Download
background image

Page 43 of 82

Copyright 1010music LLC 2020

Bitbox MK2 1.0.8 User Manual

Record a Multi-sample Pack

Bitbox mk2’s Auto-Sample feature makes it easy to create a multi-sample pack if the
source you are recording can be triggered by CV. You can also create a multi-sample
pack manually if needed.

Recording a multi-sample pack starts out the same way as recording a single sample,
but you use the 1x button next to the grid icon to change to Multi (Mx) mode.

To Auto-Sample a Multi-sample Pack:

In Auto-sample mode, you can choose the range of notes to be recorded, how many
steps between recorded samples, how many velocity layers to include, and the length of
the notes. Once you start recording, bitbox mk2 will send out CV signals through FX1
and FX2 to set the pitch and trigger the notes It will record each note into a separate
WAV file. When finished, you will have a folder full of WAV files that you can use as a
multi-sample pack.

1.

First you need to connect the FX outputs from bitbox mk2 to the source to be
recorded. Connect FX1 of bitbox mk2 to the pitch control of the instrument to
be recorded. Connect FX2 of bitbox mk2 to the Gate control of the instrument
to be recorded. Bitbox mk2 will send out a CV signal on FX1 that maps 1 V
per octave. -2V= C0, 0V=C2, 2V=C4, 5V = C7.

2.

Next, connect the audio output from the source instrument to IN1 and IN2 on
bitbox mk2. If you are only recording one channel, you only need to connect
to one input.

3.

Now we can set up the pad for recording. Push the HOME button to display
the Pads screen.

4.

Touch a pad to select it. With the pad selected, press the right arrow button. If
the pad is empty, bitbox micro will display the Load and Record screen. If the
pad is already loaded, bitbox micro will display the Waveform screen. If you
are on the Waveform screen, press the Pad Mode icon to the left of the WAV
file name at the top of the screen and then touch New Multi. You will now see
the Load and Record screen.

WAV File Load and

Record Screen -

Mx Mode

WAV File Load and

Record Screen -

Mode Selector

Summary of Contents for Bitbox mk2 1.0.8



















































































Reviews:

No comments

Related manuals for Bitbox mk2 1.0.8

Atec 8001 Operation And Maintenance Manual preview
8001
Brand: Atec Pages: 59

Brands by name

Popular brands

Load more brands