ZyXEL Communications PX7511-B0, Руководство пользователя

Страница: 126 / 150

Chapter 8 Home Networking
PX7511-B0 User’s Guide
126
The following table describes the labels in this screen.
8.4.1 Turning on UPnP in Windows 7 Example
This section shows you how to use the UPnP feature in Windows 7. UPnP server is installed in Windows 7.
Activate UPnP on the Zyxel Device in
Network Setting > Home Networking > UPnP .
Make sure the computer is connected to a LAN port of the Zyxel Device. Turn on your computer and the
Zyxel Device.
1
Click the start icon, Control Panel and then the Network and Sharing Center.
Table 33 Network Setting > Home Networking > UPnP
LABEL DESCRIPTION
UPnP State
UPnP Click this switch to enable or disable UPnP. When the switch goes to the right , the function
is enabled. Otherwise, it is not.
Be aware that anyone could use a UPnP application to open the Web Configurator's login
screen without entering the Zyxel Device's IP address (although you must still enter the password
to access the Web Configurator).
UPnP NAT-T State
UPnP NAT-T Click this switch to allow UPnP-enabled applications to automatically configure the Zyxel Device
so that they can communicate through the Zyxel Device by using NAT traversal. When the
switch goes to the right
, the function is enabled. Otherwise, it is not.
UPnP applications automatically reserve a NAT forwarding port in order to communicate with
another UPnP enabled device; this eliminates the need to manually configure port forwarding
for the UPnP enabled application.
The table below displays the NAT port forwarding rules added automatically by UPnP NAT-T.
# This is the index number of the UPnP NAT-T connection.
Description This is the description of the UPnP NAT-T connection.
Destination IP
Address This is the IP address of the other connected UPnP-enabled device.
External Port This is the external port number that identifies the service.
Internal Port This is the internal port number that identifies the service.
Protocol This is the transport layer protocol used for the service.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.