ZyXEL Communications NVG2053, Руководство пользователя

Страница: 108 / 200

Chapter 8 Wireless LAN
NVG2053 User’s Guide
108
Note: WPS works only when you set the wireless security mode to WPA-PSK or
WPA2-PSK in the Wireless LAN > General screen.
Figure 41 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 30 Network > Wireless LAN > WPS
LABEL DESCRIPTION
WPS Setup
WPS
Select Enable to turn on the WPS feature. Otherwise, select Disable.
PIN Number This displays a PIN number last time system generated. Click Generate
to generate a new PIN number.
WPS Status
Status
This displays Configured when the NVG2053 has connected to a
wireless network using WPS or when Enable WPS is selected and
wireless or wireless security settings have been changed. The current
wireless and wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no
wireless or wireless security changes on the NVG2053 or you click
Release_Configuration to remove the configured wireless and
wireless security settings.
Release
Configuration This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the NVG2053.
802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can
associate with the NVG2053.
SSID This is the name of the wireless network.
Security This is the type of wireless security employed by the network.
Apply Click Apply to save your changes back to the NVG2053.
Cancel Click Cancel to get this screen information afresh.