ZyXEL Communications NVG2053, Руководство пользователя

Страница: 23 / 200

Chapter 1 Getting to Know Your NVG2053
NVG2053 User’s Guide
23
1.2.1 The WPS Button
You can use the WPS button ( ) on the top panel of the NVG2053 to activate
WPS in order to quickly set up a wireless network with strong security.
1
Make sure the POWER LED is on (not blinking).
2
Press the WPS button for more than three seconds and release it. Press the WPS
button on another WPS-enabled device within range of the NVG2053.
Note: You must activate WPS in the NVG2053 and in another wireless device within
two minutes of each other. See Section 8.10.3 on page 114 for more
information.
1.3 Ways to Manage the NVG2053
Use any of the following methods to manage the NVG2053.
• Web Configurator. This is recommended for everyday management of the
NVG2053 using a (supported) web browser.
• Wireless switch. You can use the built-in switch of the NVG2053 to turn the
wireless function on and off without opening the Web Configurator.
• WPS (Wi-Fi Protected Setup) button. You can use the WPS button or the WPS
section of the Web Configurator to set up a wireless network with your ZyXEL
Device.
• TR-069. This is an auto-configuration server used to remotely configure your
device.
1.4 Good Habits for Managing the NVG2053
Do the following things regularly to make the NVG2053 more secure and to
manage the NVG2053 more effectively.
• Change the password. Use a password that’s not easy to guess and that consists
of different types of characters, such as numbers and letters.
• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it).
Restoring an earlier working configuration may be useful if the device becomes
unstable or even crashes. If you forget your password, you will have to reset the
NVG2053 to its factory default settings. If you backed up an earlier
configuration file, you would not have to totally re-configure the NVG2053. You
could simply restore your last configuration.