ZyXEL Communications NVG2053, Руководство пользователя

Страница: 102 / 200

Chapter 8 Wireless LAN
NVG2053 User’s Guide
102
The following table describes the labels in this screen.
8.3.4 WPA(2) Authentication
Use this screen to configure and enable WPA or WPA2 authentication; click the
Wireless LAN link under Network to display the General screen. Select WPA or
WPA2 from the Security Mode list.
Figure 37 Wireless LAN > General: WPA(2)
Table 25 Network > Wireless LAN > General: WPA(2)-PSK
LABEL DESCRIPTION
Security Mode Select WPA-PSK or WPA2-PSK to enable data encryption.
WPA
Compatible This field appears when you choose WPA-PSK2 as the Security Mode.
Check this field to allow wireless devices using WPA-PSK security
mode to connect to your NVG2053. The NVG2053 supports WPA-PSK
and WPA2-PSK simultaneously.
Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for
authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key
Update Timer The Group Key Update Timer is the rate at which the AP sends a new
group key out to all clients.
The default is 3600 seconds (60 minutes).