ZyXEL Communications NVG2053, Руководство пользователя

Страница: 149 / 200

Chapter 14 Static Route
NVG2053 User’s Guide
149
14.2.1 Static Route Edit
Click the Add Static Route button or a rule’s Edit icon in the Static Route
screen. Use this screen to configure the required information for a static route.
Figure 66 Static Route: Add
The following table describes the labels in this screen.
Table 49 Static Route: Add
LABEL DESCRIPTION
Static Route Select to enable or disable this rule.
Route Name Type a name to identify this rule. You can use up to 20 printable English
keyboard characters, including spaces.
Destination IP
Address This parameter specifies the IP network address of the final destination.
Routing is always based on network number. If you need to specify a
route to a single host, use a subnet mask of 255.255.255.255 in the
subnet mask field to force the network number to be identical to the host
ID.
IP Subnet
Mask Select an IP subnet mask here.
Gateway IP
Address Enter the IP address of the next-hop gateway. The gateway is a router or
switch on the same segment as your NVG2053's interface(s). The
gateway helps forward packets to their destinations.
Back Click Back to return to the previous screen without saving.
Apply Click Apply to save your changes back to the NVG2053.
Cancel Click Cancel to set every field in this screen to its last-saved value.