ZyXEL Communications NVG2053, Руководство пользователя

Страница: 32 / 200

Chapter 2 Tutorials
NVG2053 User’s Guide
32
You have to configure the wireless network settings on the NVG2053. Then you
can set up a wireless network using WPS (
Section 2.4.2 on page 34 ) or manual
configuration ( Section 2.4.3 on page 38 ).
2.4.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
Follow the steps below to configure the wireless settings on the NVG2053.
1
Open the Network > Wireless LAN > General screen in the NVG2053’s web
configurator. Configure the screen using the provided parameters (see
page 32 ).
2
Make sure the Enable option is selected.
3
Enter “SSID_Example” as the SSID and select Auto Channel Selection to have
the NVG2053 automatically determine a channel which is not used by another AP.
4
Set security mode to WPA-PSK and enter “DoNotStealMyWirelessNetwork” in the
Pre-Shared Key field. Click Apply.
SSID SSID_Example
Security Mode WPA-PSK
Pre-Shared Key DoNotStealMyWirelessNetwork
Operating Mode IEEE 802.11b/g/n (Mixed)