ZyXEL Communications NVG2053, Руководство пользователя

Страница: 126 / 200

Chapter 10 DHCP Server
NVG2053 User’s Guide
126
for other server computers, for instance, servers for mail, FTP, TFTP, web, etc.,
that you may have.
10.3 General Screen
Use this screen to enable the DHCP server. Click Network > DHCP Server. The
following screen displays.
Figure 54 Network > DHCP Server > General
The following table describes the labels in this screen.
10.4 Advanced Screen
This screen allows you to assign IP addresses on the LAN to specific individual
computers based on their MAC addresses. You can also use this screen to
configure the DNS server information that the NVG2053 sends to the DHCP
clients.
Table 37 Network > DHCP Server > General
LABEL DESCRIPTION
DHCP Server Select Enable to turn on the DHCP server for LAN devices. The
NVG2053 will act as a DHCP server and assign IP addresses and
provide subnet mask, gateway, and DNS server information to the
network.
Otherwise, select Disable to not have the NVG2053 provide any
DHCP services.
IP Pool Starting
Address This field specifies the first of the contiguous addresses in the IP
address pool for LAN.
Pool Size This field specifies the size, or count of the IP address pool for LAN.
Apply Click Apply to save your changes back to the NVG2053.
Cancel Click Cancel to begin configuring this screen afresh.