ZyXEL Communications NBG7510, Руководство пользователя, Страница: 112 / 149

Chapter 9 Wireless
NBG7510 User’s Guide
112
9.4 MAC Authentication
Use this screen to give exclusive access to specific devices
(Allow)
or exclude specific devices from
accessing the Zyxel Device
(Deny),
based on the MAC address of each device. Every Ethernet device
has a unique factory-assigned MAC (Media Access Control) address, which consists of six pairs of
hexadecimal characters, for example: 00:A0:C5:00:00:02. You need to know the MAC addresses of the
device you want to allow/deny to configure this screen.
Note: You can have up to 25 MAC authentication rules.
Use this screen to view your Zyxel Device’s MAC filter settings and add new MAC filter rules. Click
Network Setting
>
Wireless
>
MAC Authentication
. The screen appears as shown.
Figure 59
Network Setting> Wireless > MAC Authentication
The following table describes the labels in this screen.
Cancel Click
Cancel
to exit this screen without saving.
OK Click
OK
to save your changes.
Table 35 Network Setting > Wireless > Guest/More AP > Edit (continued)
LABEL DESCRIPTION
Table 36 Network Setting > Wireless > MAC Authentication
LABEL DESCRIPTION
General
SSID
Select the SSID for which you want to configure MAC filter settings.
MAC Restrict
Mode
Define the filter action for the list of MAC addresses in the
MAC Address
table.
Select
Disable
to turn off MAC filtering.
Select
Deny
to block access to the Zyxel Device. MAC addresses not listed will be allowed to
access the Zyxel Device.
Select
Allow
to permit access to the Zyxel Device. MAC addresses not listed will be denied
access to the Zyxel Device.
MAC address List