Zte ZXG10-OB06, Техническое руководство

Страница: 49 / 124

Chapter 3 - Interfaces and Protocols
Confidential and Proprietary Information of ZTE CORPORATION 37
• Flag: Flag is the beginning and the end token of a frame. It is an 8-bit
of data starting and ending with 0s and containing six consecutive 1s
in between.
U I - f r a m e O p e r a t i o n
The L3 message is sent in the no-serial-number frame mode. The receiver
is not required to send the received confirmation after receiving the UI-
frame. This operation mode does not provide flow control or error
recovering mechanism.
Figure 17 shows the UI-frame structure.
F
I G U R E
1 7 – L A P D U I F
R A M E
S
T R U C T U R E
000 P 0011 TEI SAPI
Address
Control Information
UI-frame structure consists of the following fields:
• Address field: It contains SAPI and TEI, which has the same function
as in I-frame Multi-frame Operation.
• Control field: In the control field P represents the query bit; if this bit is
set to 1, it means to require the response frame from the peer entity.
• Information field
LAPDm Protocol
In GSM, LAPDm is a data link protocol for signaling transmission between
MS and ZXG10-OB06 (V1.0). It uses the Dm channel to transmit
messages for entities of Layer 3 through the radio interface. LAPDm is
based on LAPD, with some simplification and modification.
In the ZXG10-OB06 (V1.0), LAPDm implements the following functions:
• Provides point-to-point data-link connection and multiple services for
the upper layer. It identifies data-link connections by DLCIs in the
frames. The DLCI only contains SAPI, and indicates the service that is
accessed.
• Provides identification of diversified frame types.
• Supports transparent transmission of L3 message between L3 entities.
• Provides sequence-control, to maintain the sequence of frames
connected through data link.