Zte ZXG10-OB06 Скачать руководство пользователя страница 46

Страница: 46 / 124

ZXG10-OB06 (V1.0) Integrated Outdoor GSM Base Station Technical Manual

Confidential and Proprietary Information of ZTE CORPORATION

Tower Amplifier System Interfaces

Tower amplifier system interfaces must be reserved during installation of
tower amplifier for ZXG10-OB06, including power interface and alarm

interface. In general, these are the interfaces for providing the DC feed
and alarm monitoring. The alarm is detected by the DC current.

ZXG10-OB06 pr12 V power supply and up to 300 mA current for

the tower amplifier system through the power interface.

In the backbone node alarm mode, the tower amplifier alarm is accessed

and monitored by OB06 through backbone node. When two lines of the
backbone node are connected, or connected at low resistance, it indicates

that there is alarm output for the tower amplifier and the alarm is ON.
When two lines of the backbone node in OB06 are not connected, or

connected at a high resistance, it indicates that there is no output for the
tower amplifier, and alarm is OFF.

Tower amplifier power interface is located on the cabinet top. One ZXG10-

OB06 cabinet can provide three tower amplifier power interfaces.

Man-Machine Interface (MMI)

The MMI is a serial communication interface between ZXG10-OB06 and
local O&M terminal.

It is carried out by the 10-BaseT network interface or RS232 interface

between the CMM and local O&M terminal.

It can be connected to the serial interface of a local O&M terminal

computer or network interface through the ETP interface of the CMM panel.

Protocol Introduction

Two important external interfaces for ZXG10-OB06 (V1.0) are Um and
Abis interface.

On Um and Abis interface, ZXG10-OB06 (V1.0) processes LAPD, LAPDm
and RR/MM/CM protocols. The following are descriptions of the three

protocols in combination with the actual system circumstance.

LAPD Protocol

LAPD (link access procedure of D-channel) is a data link procedure for
signaling transmission between ZXG10-OB06 (V1.0) and BSC. It transmits

messages between Layer-3 entities.

LAPD is a point-to-multipoint communication protocol that utilizes the

frame structure.

Содержание ZXG10-OB06





























































































































Результаты поиска

Содержание ZXG10-OB06

Отзывы:

Похожие инструкции для ZXG10-OB06

Бренды по названию

Популярные бренды

Zte ZXG10-OB06, Техническое руководство

Результаты поиска

Содержание ZXG10-OB06

Отзывы:

Похожие инструкции для ZXG10-OB06

Бренды по названию

Популярные бренды