Software User’s Manual Ver.A1D-502-V8.03.30-NB
94
5-7-4 Event List
You may define a maximum of 10 Event rules, which will be shown in abbreviated form in
the Event List panel. It will display under each Event ID, the days of the week it will be
active, the start time and duration of the active period, the type of the source of trigger,
and the actions used in the response. If the row is grayed out, this means the rule is
currently not enabled and stays inactive.
You may start creating a new event by clicking the event ID number in the list, for
example
“
2
”
. There are several parts to the Event rule:
When is it active?
You may choose to enable the rule or not. The settings will be kept in internal memory
even if the event rule is disabled. Select the days in a weekly cycle in which this rule
and schedule is active.
Determine the start time and duration of the active period. For example, a rule that lets
motion detection trigger snapshot uploads to FTP would only take place after 19:00
each day for 12 hours. Outside of this time the rule will not be active.
In the example below, the event handler rule is active 24 hours a day, 7 days a week.