Zoom NUD360-F Скачать руководство пользователя страница 5

Страница: 5 / 108

Software User’s Manual Ver.A1D-502-V8.03.30-NB

⑤

Malfunction of the device, or inconvenience, damage or harm caused as a result

by connecting with third party

’

s equipment.

⑥

Any indemnification claims or complaints due to reasons such as infringement of

privacy by individuals or organizations who became subjects as a result of

surveillance video (including records) taken by the user being publicized or used.

⑦

The registered information content will be lost due to some reason.



Every reasonable care has been taken during the writing of this manual. Please inform

your local office if you find any inaccuracies or omissions.



We are not responsible for accidents or damages caused by constructions not described

in this manual or instruction manual, or by a method not using specified parts. Also, if

a failure occurs due to its construction, it will be out of warranty for the product.



We will not be held responsible for any typographical or technical errors to the product

and manuals and reserves the right to make changes without prior notice.

About protection of personal information

Information that can be identified by the person himself / herself photographed in the

system using this camera falls under the "personal information" stipulated in the "Personal

Information Protection Law". Please handle image information properly according to the

law.

About trademark and registered trademark



Microsoft, Windows, Windows VISTA, Windows 7, Windows 8, Windows 10, Internet

Explorer are registered trademarks or trademarks of Microsoft Corporation in the

United States and other countries.



We are using screen photos according to the guidelines of Microsoft Corporation.



Windows's official name is Microsoft Windows Operating System.



Adobe, Adobe Reader, Acrobat Reader, and Adobe Active X are registered trademarks

or trademarks of Adobe Systems Incorporated in the United States and other countries.



SD logo, SDHC logo and SDXC logo are trademarks of SD-3C, LLC.



WiMAX is a trademark of WiMAX Forum.



QuickTime and Safari are registered trademarks or trademarks of Apple Computer, Inc.

in the United States and other countries.



Other company names, product names and logos described in this manual are

trademarks and registered trademarks of each company.

About copyright

Copying, disassembling, decompiling, reverse engineering, assignment of software

included in this product is prohibited. Also, exporting acts in violation of export laws of all

software included in this device are forbidden.

Содержание NUD360-F













































































































Результаты поиска

Содержание NUD360-F

Отзывы:

Zoom NUD360-F, Руководство пользователя программного обеспечения, Страница: 5 / 108

Результаты поиска

Содержание NUD360-F

Отзывы: