Zoom NUD360-F Скачать руководство пользователя страница 6

Страница: 6 / 108

Software User’s Manual Ver.A1D-502-V8.03.30-NB

Networking precautions

As this device is used by connecting to the network, it is expected to suffer damages as

follows.

① Information leakage or flow out via this device

② Interruption or stop of this device by a malicious third party

③ Illegal operation of this device by a malicious third party

In order to prevent such damages, under the responsibility of the user, please fully

implement the network security measures including the following measures.



When using this device on a system to which a PC is connected, check that checks and

disinfections against infections of computer viruses and malicious programs are

performed at regular intervals.



Use this device on a secure network using a firewall or the like.



To protect against unauthorized attacks, set a user name and password and limit the

users who can log in.



Implement countermeasures such as restricting access by user authentication so as

not to leak image data, authentication information (user name, password), alarm mail

information, FTP server information, DDNS server information etc. on the network.



Always close all browsers after accessing this device with an administrator.



Do not install the unit in such a location that the unit, cables etc.

Содержание NUD360-F













































































































Результаты поиска

Содержание NUD360-F

Отзывы:

Zoom NUD360-F, Руководство пользователя программного обеспечения, Страница: 6 / 108

Результаты поиска

Содержание NUD360-F

Отзывы: