Zoom NUD360-F Скачать руководство пользователя страница 49

Страница: 49 / 108

Software User’s Manual Ver.A1D-502-V8.03.30-NB

5-6-2 Intelligent Video

The Intelligent Video section allows users to configure the built-

in analytics of the camera. Features may vary depending on the camera model.

Note:

Intelligent Video is not supported if the Video Application Mode is set to

MultiView Mode (see

5-6-1-5 Video Application Mode

on page 44).

Microsoft Internet Explorer browser is required to configure the camera built-in

analytics.

For zoom and PTZ cameras, once the camera target view is changed, such as when

zooming in/out or scanning, the built-in analytics must be re-configured.

5-6-2-1 Motion Detection

The Motion Detection sub-section allows users to configure the video motion

detection system of the camera. Up to 10 different regions covering the whole camera

view can be configured for motion detection based on Stream 1.

Sensitivity is the parameter that helps us distinguish actual moving targets (people,

vehicles) from the slightly moving background, such as leaves of the trees waving in the

Содержание NUD360-F













































































































Результаты поиска

Содержание NUD360-F

Отзывы:

Zoom NUD360-F, Руководство пользователя программного обеспечения, Страница: 49 / 108

Результаты поиска

Содержание NUD360-F

Отзывы: