Zoom NUD360-F Скачать руководство пользователя страница 84

Страница: 84 / 108

Software User’s Manual Ver.A1D-502-V8.03.30-NB

To setup SMTP servers, make sure to enable the SMTP account. Select the SMTP Server

from the list of common SMTP servers on Network Address or choose

“

Others

”

to type

the server manually. Then, select the proper Authentication Type. There are many

types available. The default is Login. We recommend you to use Auto Detection.

Available authentication types include: Auto Detection, None, Login, Plain, Cram MD5,

Digest MD5 and PoP Relay. Enter the Network (SMTP server) Port number, User Name,

Password, the email address displayed as sender (can be different than the user name),

and Max Connection time before timeout (in

seconds

After changing any of the items above, press Apply to save the changes. The Reset

button undoes the changes that had just been made but not applied yet.

Содержание NUD360-F













































































































Результаты поиска

Содержание NUD360-F

Отзывы:

Zoom NUD360-F, Руководство пользователя программного обеспечения, Страница: 84 / 108

Результаты поиска

Содержание NUD360-F

Отзывы: