Zoom NUD360-F Скачать руководство пользователя страница 63

Страница: 63 / 108

Software User’s Manual Ver.A1D-502-V8.03.30-NB

Configure the target Speed Dome on the UI, fill in the Network Address, Network Port,

User Name and User Password. Then click the Calibration button to start calibration.

The calibration status in percent value; 100% indicates that calibration is complete.

Check Enabled to activate the OZT function.

Check Setup to configure the Region of Interest (ROI). You can set up to 4 ROI

’

Defining the ROI is very important to yield accurate tracking results.

Here, users must define the detection area based on the hemispheric camera view. Up

to four (4) ROI

’

s can be configured. Hover the mouse over the live view image and

click the crosshair to draw the ROI.

After changing any of the items above, press Apply to save the changes. The Reset

button undoes the changes that had just been made but not applied yet.

5-6-2-5 Auto Tracking (Option)

The Digital Auto Tracking function or Auto Tracking as shown on the UI, allows

Hemispheric cameras to capture moving objects within the view and follow the

objects. Every ePTZ streaming channels is used to track one object so only up to four

objects can be tracked at the same time. Auto Tracking is available only if:



Mounting type is Wall mount.



Video Application Mode is ePTZ or MultiView



Video Mode of video stream 1 is Panorama (see

5-6-1 Camera Options

page 42 and see Stream Mode on

5-6-3

Compression

on page 62)

Choose the option

“

Enabled

”

to activate the Auto Tracking function and press Apply.

Click Setup to change the minimum detectable object size by adjust the width and

height of the detection size box. The detection size box indicates the minimum size of

the object to be identified as an

“

object

”

Содержание NUD360-F













































































































Результаты поиска

Содержание NUD360-F

Отзывы:

Zoom NUD360-F, Руководство пользователя программного обеспечения, Страница: 63 / 108

Результаты поиска

Содержание NUD360-F

Отзывы: