Zoom NUD360-F Скачать руководство пользователя страница 23

Страница: 23 / 108

Software User’s Manual Ver.A1D-502-V8.03.30-NB

When choosing SNTP/NTP Server for automatic date and time updating, you can key in the

IP address of the NTP server and the time interval for automatic time synchronization. If you

want to key in the domain name of NTP server instead, please make sure the DNS server IP

address has been set under IP Settings; otherwise the camera will not be able to resolve the

domain name of the NTP server.

If all the cameras are getting the date and time from the same NTP Server, you can be most

sure that the video clips from different cameras can be well synchronized later for comparison

purposes.

To choose the most suitable NTP Server to synchronize date and time with, please refer to

the worldwide pool of NTP Servers:

http://www.pool.ntp.org/en/

When choosing Set Manually mode, you can adjust the date and time by the select boxes.

Choose the appropriate Time Zone from the select box, too. If your location is not listed there,

then pick any of the listed zones which GMT is identical with your location.

For the countries with daylight saving policy, there is Day Light Saving function with two

different types:

Type 1

–

define the starting or ending time of daylight saving period by the number of

the week in the month (First, Second, Third or Last week).

Содержание NUD360-F













































































































Результаты поиска

Содержание NUD360-F

Отзывы:

Zoom NUD360-F, Руководство пользователя программного обеспечения, Страница: 23 / 108

Результаты поиска

Содержание NUD360-F

Отзывы: