Zoom NUD360-F Скачать руководство пользователя страница 83

Страница: 83 / 108

Software User’s Manual Ver.A1D-502-V8.03.30-NB

FTP Server

FTP servers

can receive snapshot or video uploads that are issued as part of the

response from event handlers. You may setup one FTP server.

To setup FTP servers, make sure to enter the network address of FTP server, the

Network (FTP) port, the User Name and Password of FTP account, Connection mode

(Passive or Active) and Connection time before timeout.

After changing any of the items above, press Apply to save the changes. The Reset

button undoes the changes that had just been made but not applied yet.

SMTP Server

SMTP servers

can send email upon request from the IP device. The email can be a

simple subject and text email, or attached with snapshot / video. You may setup two

SMTP servers. The device will first attempt to send the message via the Primary email

SMTP server. If the first attempt fails (after the Max connecting time), the device will

attempt to send via the secondary SMTP server. If the device sends email successfully

via the primary SMTP server, then it will not use the secondary SMTP server.

Содержание NUD360-F













































































































Результаты поиска

Содержание NUD360-F

Отзывы:

Zoom NUD360-F, Руководство пользователя программного обеспечения, Страница: 83 / 108

Результаты поиска

Содержание NUD360-F

Отзывы: