Zoom NUD360-F Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 108

Zoom NUD360-F Скачать руководство пользователя страница 70

Software User’s Manual Ver.A1D-502-V8.03.30-NB

70

Parameters

Description

Day/Night mode

There are three modes:
Auto: The camera will automatically switch between day
mode (color) and night mode (black/white) under certain
exposure level, defined by user at

“

Switch from Day mode to

Night mode

”

.

Day: The camera always stays in day mode (color) regardless
of exposure level.
Night: The camera always stays in night mode (black/white)
regardless of exposure level.

IR LED Control

This feature is visible only in cameras with built-in IR LED.
There are two modes:
Auto: The built-in IR LED will be turned on automatically upon
day to night switch and turned off upon night to day switch.
Disabled: The IR LED will be off regardless of day and night
mode.

IR LED Strength
Level

The scale of 1~10 allows the user to manually define the
power level of the IR LED. The higher the value, the brighter
the IR LED is. Set the IR LED Strength Level according to the
installation environment requirement, or set it to

“

OFF

”

to turn

off the IR LED.

Switch from Day
mode to Night
mode

The scale of 0~100 allows user define the exposure level at
which the day to night switch should happen. The higher is
the value, the darker the environment has to be to trigger the
day to night switch.

«
...
68
69
70
71
72
...
»

Содержание NUD360-F













































































































Отзывы:

Нет отзывов