Software User’s Manual Ver.A1D-502-V8.03.30-NB
57
Size and Location of the Line
The size and location of the line can be any defined by the users. Lines may even be
overlapping. To configure a line, click once on a point where you want to set the
region and continue to click to draw the desired region.
For example, to configure Line 1, click
“
Setup
”
and
“
Enabled
”
of Line 1.
The crosshair indicates the cursor
position. Click a starting point of the line
on the screen. A yellow dot indicates the
starting point of the line. Then click to
mark the ending point of the line.
After completing the line, the line number, in-out direction, and the detection size
box appear.
The detection size box indicates the minimum size of the object that will cross the
line to be identified as an
“
object
”
. This feature is useful to avoid false alarms. For
example, if the detection size is set to be the size of a human, detection will not be
triggered even when a cat passes the line.
It is recommended to keep the detection size as small as possible while not causing
false alarms.
To resize the detection size, click on the
line and drag its corners.
To move the line location, click on the
line and it to the desired location.
Line Number
Detection Size