9-SURROUNDING COMPONENT
63
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-102000 Non-standard bolt M6×16
（
304 stainless steel
）
6
2
1274100-018000 ZT250
－
S anti-hot plate sleeve muffler
4
3
1244100-037000 φ12×φ8.5×2.5 circle buffer glue
4
4
1274100-057095 Flanging bushing φ6.2×φ8.5×3.5
＋
φ14×1.5
2
5
1244100-052000 Buffer rubber of flanging bushing
（
φ8.5×φ14×1
）
2
6
1224100-010000 ZT250
－
S swell nail
4
7
1221200-090000 KD150
－
Z2 middle of the lower shroud
1
8
ZT155
－
Z2 lower fairing left part
1
9
ZT155
－
Z2 lower right part of the fairing
1
10
1251300-063093 Plywood M6×11×15
（
color zinc
）
2
Fig.1 SURROUNDING
COMPONENT
Surrounding component
PROCEDURE:
●
Surrounding components
Use 4# inner hexagon to remove the 4 bolts
⑴
that surround the component, remove the bushing
⑵
, cushion
rubber
⑶
, then the surrounding component can be removed.
Use a 4# inner hexagon to remove the 2 bolts
⑴
on the middle part
⑺
of the air deflector, remove the bushing
⑷
, cushion rubber
⑸
, take out 4 expansion nails
⑹
, and remove the middle part
⑺
of the air deflector.
Remove 2 pieces of splints
⑽
from the left part
⑻
of the air deflector and the right part
⑼
of the air deflector.
CAUTION:
●
If you need to remove the surrounding bracket, please refer to the steps of "Frame & Engine Combination 2".
●
The parts should be protected during the disassembly process.
●
When removing the buckle, pay attention to the strength to prevent damage to the buckle.
●
Figure a is the unmounted state; Figure b is the assembled state; Figure c is the disassembled state.
