3-INTAKE SYSTEM COMPONENT
16
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251112-001093 M6×16 Hexagon flange bolts (color zinc)
2
2
1050956-010000 KD150-G1 EFI High Pressure Tubing Sub-assembly
1
3
1051468-007000 31.8×2 fluorine rubber O-ring
1
4
Intake manifold assembly
1
5
1051356-010000 Φ45×10 pipe clamp assembly
1
6
Throttle body assembly
1
7
1050968-003000 EV14 injector G06
1
8
1050968-002000 ZT1P58MJ injector holder
1
9
1250105-138093 GB5789M6×20 (environmental color)
1
10
1050956-005000 DLA-mini stepless motor 5mm
1
11
1050954-024000 CTS three-in-one sensor
1
after-sales
PROCEDURE:
●
High-pressure oil pipe
Press the anti-trip buckle on the high-pressure fuel pipe
⑵
and then connect the oil pan to contain the
remaining fuel. Be careful not to let the fuel drip onto the bike body.
●
Throttle valve body assembly
Unplug the connector of the throttle valve body, remove the throttle cable and use an 8# wrench to remove the
2 bolts (1) Remove the throttle valve body assembly.
Remove the O-ring
⑶
, check carefully for damage before reinstalling.
Use a 10# sleeve to remove the bolt
⑼
and then remove the retainer
⑻
, and remove the fuel injector
⑺
.
After loosening the clamp
⑸
, remove the throttle valve body assembly
⑹
, and then remove the clamp
⑸
.
●
Throttle valve body after-sales parts
Throttle valve body assembly already contains stepper motor
⑽
and sensor
⑾
. Remove the 2 bolts and then
remove the clip, and then remove the stepping motor
⑽
; then remove the 2 bolts that fix the sensor to remove the
sensor
⑾
.
CAUTION:
●
First it need to remove the cushion,side cover,oil tank outside cover and liner,rear shock absorber and
electrical device box etc.
●
When removing the high pressure oil pipe,It is sure to operate until the engine and muffler are completely
cooled.
●
Fireworks, answering or dialing should be strictly prohibited near the car-breaking site to prevent accidents.
Fig.2 INDUCTION
SYSTEM COMPONENT
Throttle valve body component