manualshive.com logo in svg

Zimmer A.T.S. 4000TS, Руководство оператора и сервисное руководство, Страница: 8 / 76

Поделиться
Скачать
Zimmer A.T.S. 4000TS Скачать руководство пользователя страница 8

Page 7

GENERAL INFORMATION

Power Cord

Type SJT or international equivalent of HO5VV-F, 
AWG 16 (1.31mm

2

), 14 ft. (4.27 m).

Power Plug

Hospital grade, 3 prong straight blade, 15 amp or 
proper equivalent power plug.

Line Protection

2 time-delayed 1.0 amp 250 volt fuses.

Cuff Pressure Range

50–400 mmHg, 1 mmHg increments.

Cuff Extended Pressure Range

401-600 mmHg, 1mmHg increments. A yellow tile 
will appear requesting confi rmation to exceed 400 
mmHg pressure.

Pressure Accuracy

±3 mmHg (50–600 mmHg).

Pressure Regulation

±4 mmHg of set-point (10 second average under 
non-transient conditions without external leaks).

Maximum Pressure

400 mmHg per cuff.

600 mmHg per cuff in extended pressure range.

Time Alarm Set Range

1–240 minutes; 1 minute increments.

Timer Accuracy

0.25% of elapsed time.

Internal Diagnostics

Program, memory, watchdog timer, transducer 
calibration, improper valve actuation, touch-screen, 
backlight, LCD.

Size

Height:

 

13.1 in. (33.3 cm).

Width:

 

9.3 in. (23.6 cm).

Depth:

 

10.5 in. (26.7 cm) (including clamp).

Weight:

 

13.2 lbs. (6.0 Kg) (including power 

cord).

Displays

The 

A.T.S. 

4000TS uses an 8.4” SVGA LED backlit 

LCD panel.

Pressure Display: 

Displays pressure setting, 

sensed cuff pressure, and other messages.

Time Display: 

Displays time alarm set-point and 

elapsed time.

IV Pole

Height:

 suffi cient to mount unit at 

≤

 50 inches (127 

cm) from fl oor to base of ATS unit.

Pole Diameter:

 0.872 to 1.125 inches.

Base Diameter:

 

≥

27.56 inches (70 cm).

Содержание A.T.S. 4000TS













































































Отзывы:

Нет отзывов