Zimmer A.T.S. 4000TS Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 76

Zimmer A.T.S. 4000TS Скачать руководство пользователя страница 11

Page 10

INSTALLATION AND OPERATING INSTRUCTIONS

Button/Icon Title

What it means

Brightness Icon

Appears in the system Settings when adjusting the backlight
brightness.

LOP Button

Controls the Limb Occlusion Pressure (LOP) feature. When the
pulse sensor is in place and cuff applied, pressing this button will
start the process to measure the patient’s LOP and give the user a
recommended Tourniquet pressure (RTP).

Cuff Progress Icon

Indicates that the Tourniquet system is currently testing the
Tourniquet cuff attached to the Main Cuff Ports.

Cuff Success Icon

Indicates that the Tourniquet system has tested the Tourniquet cuff
attached to the Main Cuff Ports and that it passed the leak test.

Cuff Fail Icon

Indicates that the Tourniquet system has tested the Tourniquet cuff
attached to the Main Cuff Ports and that it failed the leak test.

Check Cuff Icon

Indicates that the Tourniquet system has detected a connection or
infl ation problem with the Tourniquet cuff attached to the Main Cuff
Ports when attempting to leak-test the cuff.

INFLATE Button

(INFL)

Controls infl ation of the respective cuff. The Main Cuff and Second
Cuff have separate INFLATE buttons.

DEFLATE Button

(DEFL)

Controls defl ation of the respective cuff. The Main Cuff and Second
Cuff have separate DEFLATE buttons.

Okay/Success Button

Allows user to approve, save and exit specifi c functions.

Cancel/Fail Button

Allows user to exit specifi c functions without saving.

Retry/Reload/Reset

Button

Allows user to restart, reset, or retry specifi c functions.

Next Button

Allows user to progress to the next step in specifi c functions.

Progress Icon

Appears and animates to indicate that a specifi c function is loading
or working.

A.T.S.

Progress Icon

Indicates that a Tourniquet instrument level function is loading or
working.

A.T.S.

Fail Icon

Indicates that a Tourniquet instrument test has failed to meet the
requirements.

A.T.S.

Success Icon

Indicates that a Tourniquet instrument test has successfully met the
requirements.

A.T.S.

w/ Cuff Icon

Appears and

animates

to indicate that the Advanced Leak Detection

feature has detected a potential leak with a cuff, hoses or the
pneumatic connection between the cuff and device during cuff
infl ation.

Pressure Icon

Represents a Pressure function.

Time Icon

Represents a Time function.

«
...
9
10
11
12
13
...
»

Содержание A.T.S. 4000TS













































































Отзывы:

Нет отзывов