Zimmer A.T.S. 4000TS Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 76

Zimmer A.T.S. 4000TS Скачать руководство пользователя страница 13

Page 12

INSTALLATION AND OPERATING INSTRUCTIONS

Feature

What it does

1

Carrying Handle

Handle for carrying or holding the Tourniquet system.

2

Touch Screen GUI

Touch-screen based graphical user interface (GUI) for interacting with and
controlling most of the Tourniquet system functions.

3

Power ON/STANDBY
Button

Turns the unit ON or sets the unit to STANDBY.

The illuminated green AC INDICATOR indicates that the unit is plugged
in and is being powered by ~ AC Power Mains. This is the normal means
of operation (battery power is only intended for emergency power loss or
patient transport).

CAUTION:

Ensure both cuffs are fully defl ated and have been

removed from the patient as well as all underlying bandages or
protective sleeve prior to setting the unit to STANDBY.

CAUTION:

•

This button will not set the unit to STANDBY when the cuff
pressure is at a non-zero value.

•

During STANDBY, the power to the

A.T.S.

4000TS instrument

and all instrument functions (i.e. infl ation, defl ation, etc.)
are OFF but power continues to supply the battery charging
circuitry anytime ~ AC Power Mains is present.

4

Alarm Silence Button

Will silence most audible alarms for 30 seconds after the button is
pressed.

An alarm silenced icon will appear in the cuff status display to indicate the
alarm is silenced. Alarms will silence after the full priority tone has played.

CAUTION:

•

When an alarm sounds because of an internal hardware
malfunction, the alarm cannot be silenced.

•

The alarm messages will continue to fl ash on the displays
until the alarm condition is corrected.

4

10

9

12
13

14

11

15

6

7

5

1

17

2

3

16

8

«
...
11
12
13
14
15
...
»

Содержание A.T.S. 4000TS













































































Отзывы:

Нет отзывов