11 Events / Fault signals
11.1 Display and query of events and malfunctions
Events
Events during operation can lead to a malfunctioning of the device.
The last 10 (0 - 9) events and malfunctions are stored in the
“
Events
”
menu
group (position
“
0
”
= most recent event).
Essemple for possi-
ble events
The device differentiates between 3 types of events:
Sensor 1
1. Messages with code
|
Msg
|
Message sensor fault for information, for Alarm
sensor deactivated.
External error
2. Alarms with code
|
AL
|
Events during which the device automatically
restarts operation after the cause of the malfunction has been remedied (e.g.
mains failure), or remains in operation (e.g. externally-trunked centralized
fault).
Motor fault
3. Error with code
|
Err
|
Events that lead to a disconnection of the controlled
output (e.g. excess motor temperature). Restarting is only possible after a
reset (locked).
Motor fault
Controllers period of operation at time of message:
With the
P
key can be switched between description of
the message and the Controllers period of operation at
this time.
E.G. on place 3 which is past message
motor fault
00009:01:08
11.2 Messages and trouble shooting
A momentary pending alarm or error message is indicated by a blinking indicator and appears
alternately with the standard display.
Operating conditions are indicated by the internal status LED with
ashing code.
internal State LED
11.02.2009
v_flash_explain.VSD
3 x
2 x
ON
OFF
4 x
5 x
6 x
1 x
7 x
8 x
9 x
Operating Instruction
Econtrol
–
model series EXDM
Events / Fault signals
L-BAL-E008-GB 0945 Index 005
Part.-No. 00156742-GB
75/85
