ZIEHL-ABEGG Econtrol EXDM, Инструкция по эксплуатации

Страница: 55 / 86

A1 Function “ A min. ” and “ A max. ”
Analog
Out
5 V
10 V
0 50 100 0 -100 %
A max: 10 – 5V
A min: 0 – 5V
10.05.2007
v_a1_funktion_amin_amax.vsd
A1 Function
|
3A
|
/
|
4A
|
5 V
10 V
Analog IN
0 1 2 3 4 5 6 7 8 9 10
10 9 8 7 6 5 4 3 2 1 0
0 2 4 6 8 10 12 14 16 18 20
20 18 16 14 12 10 8 6 4 2 0
4 5,6 7,2 8,8 10,4 12 13,6 15,2 16,8 18,4 20
20 18,4 16,8 15,2 13,6 12 10,4 8,8 7,2 5,6 4
0 – 10 V
10 – 0 V
0 – 20 mA
20 – 0 mA
4 – 20 mA
20 – 4 mA
-27 -16.8 -6.6 3.6 13.8 24 34,2 44.4 54.6 64.8 +75 TF.. (KTY)
10.05.2007
v_a1_funktion_3a_4a.vsd
9.10.3 Digital inputs “ D1 ” / “ D2 ”
9.10.3.1 Menu overview
D1 Function
The digital inputs Digital In 1 (D1) and Digital In 2 (D2) can be allocated with
various functions.
Activation via
 oating contacts (a low voltage of approx. 24 V DC is con-
nected).
D1 Inverting
Inverting “ D1 ” and “ D2 ” possible
D1 Busmode
With networking the digital inputs can be replaced by control over bus.
With mode of operation
4.03 pre-setting of “ D1 ” and “ D2 ” is
|
ON
|
.
Attention!
Never apply line voltage to the digital input!
Function Description
OFF no function (factory setting)
1D Enable (remote control) “ ON ” / “ OFF ”
2D External error
3D “ Limit ” ON / OFF
4D Switch over “ E1 ” / “ E2 ”
For mode speed controller 1.01
5D Switch over “ Setpoint Intern1 ” / “ Setpoint Intern2 ”
6D Switch over “ Intern ” / “ Extern ”
For modes as controller higher 2.01
5D Switch over “ Setpoint1 ” / “ Setpoint2 ”
6D Switch over “ Intern ” / “ Extern ”
7D Switch over “ automatic control ” / “ Speed manual ”
8D Switch over control function (e.g. “ heating ” / “ cooling ” )
Operating Instruction Econtrol – model series EXDM Programming
L-BAL-E008-GB 0945 Index 005 Part.-No. 00156742-GB
54/85