Zhermack hurrimix 2, Руководство пользователя

Страница: 26 / 224

26
The reference figures are present on pages 3, 4, 5 and 6 of this manual and in the product Quick Guide.
EN
hurrimix 2
6.7 ZhERMACK PRESET PROGRAMS
Hurrimix 2
software has 20 mixing programs, divided as follows:
• Alginate section: 10 programs, 7 of which are preset (specific for Zhermack
products) and 3 can be managed by the user.
• Plaster section: 10 programs, 7 of which are preset (specific for Zhermack
products) and 3 can be managed by the user.
All programs can be modified by the user: By pressing buttons
“+” and “-”, the mixing time can be increased or decreased (from
a minimum of 2 to a maximum of 30 seconds).
Alginates Time Mixing
Hydrocolor 5 6 sec
Hydrogum 5 6 sec
Hydrogum 10 sec
Orthoprint 6 sec
Tropicalgin 8 sec
Phase Plus 8 sec
Neocolloid 10 sec
Prog. 1 6 sec
Prog. 2 8 sec
Prog. 3 10 sec
Dental Stones Time Mixing
Elite Rock 6 sec
Elite Master 6 sec
Elite Model 8 sec
Elite Model Fast 6 sec
Elite Stone 6 sec
Elite Ortho 6 sec
Elite Arti 8 sec
Prog. 1 6 sec
Prog. 2 8 sec
Prog. 3 10 sec
To reset the default programs, press and hold button 8b (fig. A)
and at the same time, turn the device on by pressing button 7
(fig. A).
6.8 DECLARED USE
Hurrimix 2 mixer has been designed to mix alginates and plasters for the
dental industry.
6.9 NON-DECLARED/PROhIBITED USE
Using the equipment for any purpose not considered in
paragraph regarding “Declared use” shall be considered
improper and thus forbidden.
The improper use of the equipment renders the warranty null
and void and Zhermack declines all liability for any damage to
objects and injury to operators or third parties.
The main reasons for which the warranty is rendered null and void are given
in paragraph 2.2 and in the “Warranty Certificate” attached to this Manual.
ChAPTER 7: USING ThE EqUIPMENT
7.1 GENERAL WARNINGS
For total certainty of safe operation, scrupulously follow the
work phases given below.
For greater clarity, the numbers stated in the figures positioned
near to the paragraph boxes correspond to the numbering of
the data in Chapter 3, regarding the “Description of the
equipment”.
To avoid the occurrence of any risks, pay attention to avoid
pouring water during the preparation on the electrical voltage
parts.
To avoid any interference, the equipment has been projected to
perform a mixing cycle every 3 minutes.
7.2 USE OF ThE MIXER WITh ALGINATE
Do not activate the device without material inside the container.
Hurrimix
2
mixes the most common alginates; recommended
quantity 60g, max 80g (powder + water). Do not exceed the
maximum permitted quantity to avoid malfunction.
The device guarantees the best results by using Zhermack
alginates.
Once it has been correctly installed and put into service, proceed as follows:
Fig. 5: Press the program button (fig. A, 8a - 8b) to scroll and select the
desired program in the Alginates section (fig.5, A).
Mixing time can be customised, by pressing buttons “+” (fig.A, 9) and “-”
(fig.A,10). Keep the button pressed for a fast scroll.
Fig. 6: before opening the lid, opening must be enabled by briefly pressing
the release button (fig. A, 7). The lid can be opened 3 seconds after pressing
the button.
Fig. 7: Dose the alginate powder with a measuring cup as suggested by the
Manufacturer and pour it in the appropriate container of alginate mixing.
Comply with the dosage indicated by the Manufacturer.
Fig. 8: Add the correct quantity of water, using the bottle with graduated
measuring cup (provided with).
Keep away from Hurrimix
2
when you pour water into the bowl
to prevent water from spilling over it.
Recommended separation distances between portable and mobile radiocommunications equipment and hurrimix
2
Hurrimix
2
is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The client or Hurrimix
2
user can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and Hurrimix 2 ,
according to the maximum output power of the communications equipment, as recommended below.
Rated maximum output power of
the transmitter
W
Separation distance according to the frequency of the transmitter
m
150 kHz to 80 MHz
d = [3,5/V
1
] √P
80 MHz to 800 MHz
d = [3,5/E
1
] √P
800 MHz to 2,5 GHz
d = [7/E
1
] √P
0,01 0,12 0,12 0,23
0,1 0,38 0,38 0,73
1 1,2 1,2 2,3
10 3,8 3,8 7,3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
Note 1: At 80 MHz and 800MHz, the separation distance for the highest frequency range applies.
Nota 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects, and
people.