Programming
98
3. Configure the ANI decode settings as needed. The following table explains each
setting:
4. Click
Done
when you are finished.
Operating Mode
Select the desired operating mode:
• No ANI Display - ANI is not displayed on this position.
• Selected Channels - ANI is displayed at this position for select channels
only.
• All Channels - ANI is displayed at this position for all channels.
Unmute Channel Upon
Receiving ANI
Select
Yes
to enable channels to be automatically unmuted when an ANI is
received. If channels are already unmuted, this has no effect.
Primary Address
Secondary Address
Each console supports two Reverse Selective Calling ANI addresses. There
is no functional difference between the Primary Address and Secondary
Address; they both perform the same function. You can configure a Primary
Address only, or a Secondary Address only, or both. Configuring an
address automatically puts the console in Reverse Selective Calling (RSC)
Mode.
• The primary and secondary addresses both act as filters to the ANI
displayed.
• If an incoming PTT ID does not have one of the configured addresses, it
is not displayed.
• Only the digits following the Primary/Secondary Address are displayed.
(Digits prior to the address and the address digits are not displayed.)
• The Primary Address has priority over the Secondary Address. If an
incoming ANI happens to match both addresses, the Primary Address is
used for filtering the ANI.
Enter the primary address by entering up to six digits in the
Primary
Address
field. Enter the secondary address in the same manner. The
following characters are valid digits “0123456789ABCD#*”.
See
Example Results for Primary and Secondary Addresses
Timeout Period
The timeout period is the time window between the detection of a valid
address and the last ANI digit accepted.
During operation, new ANIs will only be recognized after the time period
has elapsed after the previous ANI. If the calling unit has automatic ANI
calling, one or two seconds should be sufficient. If the calling unit uses a
manual keypad to enter the ANI address, five seconds is the normal
timeout.
Enter a timeout period from 1 to 10 seconds.
Emergency ANI
Acknowledge
This function makes the console automatically acknowledge the receipt of
an ANI on any selected channel that has this function enabled. Mark the
check boxes to select channels for emergency ANI acknowledgement.
Содержание 4010
Страница 1: ...Model 4010 Radio Dispatch Console Installation and Programming 025 9227S ...
Страница 46: ...Console Installation 46 025 9227S ...
Страница 78: ...Option Installation 78 025 9227S ...
Страница 134: ...Appendix D Troubleshooting 134 025 9227S ...