ZETRON 4010, Установка и программирование

Страница: 126 / 138

Appendix B: CPSW Reference Material
126 025-9227S
Diagnostics Reset
By programming this key, any diagnostic messages displayed on the console will be held
until the key is pressed. If this key is not assigned, the diagnostic will be removed after
approximately three seconds or when the next key is pressed.
Clock Set
By programming this key, clock setting can be initiated by pressing the “CLOCK SET”
key on the key panel.
The first time the “CLOCK SET” key is pressed, the seconds-unit on the time display will
be highlighted with an underscore. The seconds-unit may be adjusted up or down using
the “CHANNEL VOLUME” knob. When the desired number of seconds have been set,
press the “CLOCK SET” key again.
In a similar manner, each time you press the “CLOCK SET” key, another time unit will be
highlighted in the display, until the entire time and date have been set. The units are
adjusted starting with seconds, then minutes, hours, month, day, and finally year. The
display will automatically show the date once the three units of the time of day have been
set. You may distinguish a time display from a date display by the colon (:) units separator
used for time versus the slash (/) units separator used for date.
Channel Test
This key is for diagnostic use only. Pressing this key will cause all indicator LEDs to light
for any channel which is currently inoperable.
ANI Review
Because ANIs are received from various radios, they will be decoded and stored in a
“stack” in memory. The ANIs are reviewed and removed from the stack by repeatedly
pressing this key. The LED associated with this key will blink as long as an ANI remains
in the stack.
ANI Select
Pressing the ANI Select key will cause the channel that received the ANI showing in the
display to be “Selected”.
Note ANI Select only functions if the optional ANI hardware is installed in
the console on a DCC Channel A or B.
Note ANI Review only functions if the optional ANI hardware is installed
in the console on a DCC Channel A or B.