Zeta SmartConnect, Руководство по установке

Страница: 8 / 88

Smart Connect Single Loop Touch Screen Panel
Doc: GLT-229-7-1
8
Issue: 3
Date: 12/05/2017
2.3 PANEL SPECIFICATIONS - ENCLOSURE
DESCRIPTION VALUE
ENCLOSURE SIZE (L x W x D mm) 370 X 311 X 113 mm
TOP CABLE ENTRIES 15
BOTTOM CABLE ENTRIES 0
2.4 PANEL SPECIFICATIONS - ELECTRICAL
ELECTRICAL DESCRIPTION VALUE
MAINS VOLTAGE 230 V AC + 10% / - 15%
BATTERY VOLTAGE 2 x 12V SLA (27.6V DC @ 20 C) (3Ah – 7Ah)
POWER SUPPLY NON-INTEGRAL (SWITCH MODE)
DC OUTPUT: Vmax = 31V ,Vmin = 19.5V
I max A: 4.1 A
Ripple & Noise: <= 0.6V
CIE DC INPUT VOLTAGE Vmax = 31.5V, Vmin = 19.5V
CHARGER VOLTAGE 27.3V
Monitored Inputs (x2) End-of-Line Resistance: 4k7ohm 0.25W
Trigger value: 2k7 ohm
CONVENTIONAL SOUNDER OUTPUT (x2) I max: 100mA
Quiescent voltage: -5 to -9V DC
Active voltage: 18 to 28V DC
End-of-Line Resistance: 4k7 ohm 0.25W
FIRE RELAY OUTPUT (x1) (C,NO,NC)
Contact rating: 230V AC @ 1A
FAULT RELAY OUTPUT (x1) Normally Energised (C,NO,NC)
Contact rating: 230V AC @ 1A
AUX 28V 100mA
LOOP VOLTAGE 35V Nominal (Vmax 39 V DC Vmin 24 V DC)
MAXIMUM LOOP CURRENT 500 mA
NUMBER OF LOOPS 1
MAXIMUM NUMBER OF ZONES 254 Zones
MAXIMUM LOOP CAPACITY 254 Addresses
MAXIMUM LOOP LENGTH 2 km
MAXIMUM LOOP RESISTANCE 44 ohm (22 ohms + to +, 22 ohms – to -)
MAXIMUM LOOP CAPACITANCE 500 nF
MAXIMUM LOOP BAUD RATE 1024 Bits Per Second
MAXIMUM NETWORK SIZE 16 nodes
MAXIMUM DISTANCE BETWEEN NODES 1 km with screened Data cable
LCD DISPLAY 4.3” Resistive touch screen. 480 x 272 pixel resolution
LED INDICATION Fire Zones 1 – 16
Fault / Disable / Test Zones 1 - 16
Power
Common Fire
Sounder Delay On
General Disablement
Controls active
System Fault
Common Fault
Sounder Fault / Disablement
General Test
Sounder Active
KEY ENTRY Start Sounders
Stop Sounders
Silence Buzzer
Reset
(All other controls via touch screen)
ENVIRONMENTAL DATA Temperature: -5 to 40 C
Relative Humidity: 95% Non-Condensing
will withstand vibrations between 5 & 150 Hz
ENCLOSURE RATING IP 30
OTHER PORTS USB
RS485 for network
TCP/IP
Micro SD card (for future use)
EN 54-2 Optional Functions with Requirements 7.8, 7.11,7.12, 8.3, 9.5, 10