manualshive.com logo in svg

Zero 88 FLX Series, Руководство пользователя


Поделиться
Скачать
background image

The first button in the Chase's settings, is  Revert From Chase  Clicking this allows you to revert your chase back into
a normal cue stack, and the remaining options in the chase's settings tab are hidden. This button then becomes 

Turn into Chase , meaning that any playback can be turned into a chase, by opening the playback's settings, and

tapping  Chase  ->  Turn into Chase . This is the reason that cue fade times are shown for chases. These timings
are not used by the chase itself, but are used as cue times if reverted from a chase.

Chase Direction

This option determines which order the cues are output when the chase is run:

Forward  – The steps are output in increasing numerical order (eg 1,2,3,4,5).

Backward  – The steps are output in reverse order (eg 5,4,3,2,1).

Bounce  – Alternates between forwards and backwards (eg 1,2,3,4,5,4,3,2,1).

Random  – The steps are output in a random order.

Intensity

Intensities in a chase can be set to  Cross Fade ,  Ramp Up  or  Ramp Down .  Ramp Up  will fade up the
intensity, and then snap it off, whereas  Ramp Down  will snap on the intensity, and then fade it down. The default
option is  Cross Fade . After choosing the intensity option, you can then configure the intensity fade percentage,
explained below.

Attribute fade percentages

Individual fade percentages can be set for each attribute. Assuming the chase speed is set to 12 Beats Per Minute
(meaning 1 step every 5 seconds), a fade percentage of 20% means that attribute will fade for 1 seconds (20% of 5
seconds), and then remain on for the other 4 seconds (80% of 5 seconds).

A fade percentage of 0% is equivalent of a snap, and a fade percentage of 100% is the equivalent of a cross fade.

Chase Speed

The speed option determines how fast the chase runs.

The chase runs at the corresponding number of beats per minute (BPM). All the fade and delay times that are
programmed in the cues are ignored and the transition between each cue is determined by the “Intensity” and
“Attribute fade percentages” options above.

By default, chases will run at 60BPM. The default button function for chases is "Tap Tempo", meaning the console can
calculate the BPM required by tapping the chase's button. Tapping a tempo for the chase using the playback's button
will overwrite the BPM entered into the chase speed field. Therefore if you require a chase to run at a given speed by
entering a speed in BPM, it is a good idea to then change the chase's button function to become flash for example, to
stop the custom speed being overwritten. To change the button function from the chase settings tap  General  -> 

Flash

Alternatively,  Use Global BPM  can be selected. This allows multiple chases to all use the same BPM. The Global
BPM speed can be controlled by pressing the 

 button and changing the “Global BPM” wheel, or by holding 

Setup  and pressing the Playback Button of an empty playback, and selecting  Global Tap Tempo  . The central

encoder button or playback button will now work as a Tap Tempo, and the encoder/fader will speed up/slow down the
Global BPM.

Z

Zero 88 - ZerOS - Page 127 of 233

Printed: 23/11/2020 12:50:03 JH

Содержание FLX Series










































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FLX Series

D&R Lyra Maintenance Manual preview
Lyra
Бренд: D&R Страницы: 17
Hamilton Beach Professional M47 Operation Manual - Original Instructions preview
M47
Бренд: Hamilton Beach Professional Страницы: 64
Airpatch 2AU4S-716 Manual preview
2AU4S-716
Бренд: Airpatch Страницы: 16
GRANGE equipment GRPF10 User Manual preview
GRPF10
Бренд: GRANGE equipment Страницы: 8
Hungry Robot Pedals The Karman Line Manual preview
The Karman Line
Бренд: Hungry Robot Pedals Страницы: 3
Omnitronic TRM-422 User Manual preview
TRM-422
Бренд: Omnitronic Страницы: 20
BMF Effects BMF Wah Quick Start Manual preview
BMF Wah
Бренд: BMF Effects Страницы: 2
Fishman AFX DELAY Manual preview
AFX DELAY
Бренд: Fishman Страницы: 16
TC Electronic DITTO JAM X2 LOOPER Quick Start Manual preview
DITTO JAM X2 LOOPER
Бренд: TC Electronic Страницы: 7
Ozito OZMM1010A Operation Manual preview
OZMM1010A
Бренд: Ozito Страницы: 8
Ozito DMM-080U Original Instructions Manual preview
DMM-080U
Бренд: Ozito Страницы: 8
Hyundai HMB 205W Instruction Manual preview
HMB 205W
Бренд: Hyundai Страницы: 32
Samson MDR 16 Owner'S Manual preview
MDR 16
Бренд: Samson Страницы: 32
Samson L2400 Product Specification Sheet preview
L2400
Бренд: Samson Страницы: 3
Philips Cucina HR1566 Manual preview
Cucina HR1566
Бренд: Philips Страницы: 7
Philips HL1605/01 User Manual preview
HL1605/01
Бренд: Philips Страницы: 9
Philips HL1618/00 User Manual preview
HL1618/00
Бренд: Philips Страницы: 11
Philips Strand Lighting 100 plus series Operation Manuals preview
Strand Lighting 100 plus series
Бренд: Philips Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды