Roll-ZAS
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
37
3.4
INPUTS
ZAS incorporates two input channels that can be configured as switches/sensors,
temperature probes or motion sensors.
Once an input is enabled, and depending on the selected input type, a new tab will be
available from the menu on the left.
3.4.1
SWITCH/SENSOR
After configuring an input as a switch/sensor, it is necessary to select the actions to be
performed on the arrival of a falling edge and on the arrival of a rising edge.
Figure 21
. Input: Switch/Sensor
The available options are:
Rising Edge
: sets the value to be sent to the bus when a rising edge is
detected in the input line:
Nothing
(no action is performed).
0
: object "[Ix] Edge" is sent to the KNX bus with value "0".
1
: object "[Ix] Edge" is sent to the KNX bus with value "1"”.
Switching
: "0" or "1" are alternatively sent to the KNX bus.
Falling Edge
:
sets the value to be sent to the bus when a falling edge is
detected in the input line: “Nothing”, “0”, “1” o “Switching”.
