Roll-ZAS
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
17
binary objects. In the case of Scenes, the special levels will be activated
upon the reception of the parameterised scene values through the
"[General] Scene: receive" object.
LED Blink Object
: enabling this parameter brings a new 1-bit
communication object, "[General] LED Blink", which will make the LEDs of
every touch button in ZAS light during the time specified under "Blink time"
(1-20 seconds) on the reception of the value "1".
This option may be useful if combined to a motion sensor (such as model
ZN1IO-DETEC from Zennio) connected to ZAS, so that when movements
are detected in the room, ZAS can turn on all the LEDs on the panel, thus
making it easier to locate them even in the darkness. To make this
possible, the "[General] LED Blink" object must be linked to the same
group address as the object that reports the motion detections.
Touch Locking.
This function allows locking and unlocking the ZAS buttons.
The following fields can be configured:
Locking Method
:
the ZAS buttons may be locked (i.e., user presses over
them will be ignored) through a 1-bit object (“[General] Touch lock”, which
will lock ZAS when the values “1” or “0” are received, according to the
parameterisation), through scenes (value 1 to 64, configurable) or
automatically by setting a timeout interval between the last user interaction
and the actual lock order.
Unlocking Method
: the ZAS buttons may be unlocked by means of the
"[General] Touch unlock" 1-bit object (value “0” or “1”, configurable), of
