Roll-ZAS
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
34
Note
:
Level 2 is the maximum security level, so the password for Level 2 has a
higher
priority
than that for Level 1. This means that it will be possible to access pages
protected with Level 1 by using the password for Level 2, but not the opposite.
Next, it is necessary to set the desired protection level for every page (pages 1-4 and
Configuration page): Not Restricted; Restricted: Level 1; or Restricted: Level 2. The
protection level is associated to the page itself, not to the buttons of the page. The
Security page is always protected with the maximum security level, depending to the
number of the security levels available.
Last, it is possible to configure several
Labels
or text strings that will be shown to the
user when setting or modifying the password from the touch panel, in execution time.
The security configuration may be modified in runtime from the Security page itself (see
Figure 19).
Figure 19
. Security Page
Buttons 1-4 allow modifying the access protection of pages 1-4, respectively, while
button 5 is intended to modify the access protection of the Configuration page. Short
presses over these buttons will step through the following sequence: No security ( )
Level 1( )
Level 2 ( )
No security ( )…
Buttons 7 and 8 allow changing the password initially configured in ETS for Level 1 and
Level 2, respectively.
Whenever the user tries to access a page with a certain level of protection, the device
will ask for the required password, after which the user will be granted access to
navigate freely, during 60 seconds, across all pages with a protection level similar or
lower than that of the typed password. When this time expires, ZAS will ask for the
password if the user tries to access a page protected with whatever security level. If the
typed password is wrong, it will not be possible to type it again before 3 seconds, for
security reasons.
