Roll-ZAS
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
27
limits must be configured (values between 0 and 255). The behaviour of this
type of buttons is as follows:
Decrease Button
: a short press decreases the counter value by 1 unit,
while a long press decreases the value by 10 units.
Increase Button
: a short press increases the counter value by 1 unit,
while a long press increases the value by 10 units.
Enumeration
: allows configuring up to 6 discrete numerical values (or states)
by means of the Value 1 – Value 6 parameters. The user will be able to
progressively step through the different states by pressing on the
increase/decrease buttons. Once the user selects a certain state, the
numerical value that represents such state will be sent to the bus, while the
text label corresponding to that state (parameters Label 1 – Label 6) will be
shown on the screen. The first press will always show the current value of the
control. A long press over any of the two buttons of the couple will send the
current value to the bus.
Temperature
: allows controlling a temperature value (between -20ºC and
95ºC). Associated to this functionality is the 2-byte communication object
"[Px][Byz] Temperature control". Lower and upper limits (in the range -20 -
95ºC in any case) must be configured.
The behaviour of this type of buttons is the following:
Decrease Button
: a short press decreases the temperature value by 0.5
units, while a long press decreases the value by 1 unit.
Increase Button
: a short press increases the temperature value by 0.5
units, while a long press increases the value by 1 unit.
Switch C Indicator
: Enables one 1-bit communication object for
each pair, "[Px][Byz] Binary control", which will send the value "0" or "1",
depending on the button being pressed. Moreover, a numerical indicator may
be configured, whose value will be shown in the Display, next to the
parameterised name for the pair of buttons. This indicator can be of the
following types:
