Roll-ZAS
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
15
Figure 9
. Default Configuration Window
As shown in Figure 9, the configuration window is divided into the following primary
tabs:
General
: sets and configures the main functionality of the controller and of
the infrared remote control. The “
General Labels
” sub-tab is shown by
default.
Pages
: enables and configures each of the available pages, as well as the
procedure for switching from one to another and the parameters related to the
Screensaver. The “
Page 1
” sub-tab is shown by default.
Inputs
: enables and configures each of the two input lines available in ZAS.
Thermostats
: enables and configures each of the two thermostat functions
available in ZAS.
Presence Simulation
:
destined to enable the presence simulation and to
configure its parameters.
In the following sections, all the aforementioned windows are explained in detail.
3.2
GENERAL
The General window allows enabling and configuring the basic functionalities of the
controller and the remote control.
The basic functions that can be configured in the General section are the following:
